1. Platform design for easy carry out, the weight is less than 36kg
2. Can not be damaged by air-inflated tires at any spot of passage
3. Adopt special protective technology, suitable for any environment in applications
Specifications :
Standard Capacities
t
15
Temperature, operating Range
0C
-40-80
Combined Error
%FS
0.1, 0.2
Excitation, Voltage
V
9-15(DC)
Rated output
Mv/v
0.9
Maximum Excitation Voltage
V
20
Non-linearity
%FS
0.1, 0.2
Non-repeatability
%FS
0.1, 0.2
Safe Overload
%FS
120
Transverse consistency
%
0.5
Single ultimate Overload
T
10
Zero balance
uv
400-1000
Full load
T
15
Temperature effect on span
%FS/100
0.1
Input Resistance
Ω
3120
Temperature effect on zero
%FS/100
0.1
Output Resistance
Ω
2800
Compensated Temperature Range
0C
-10-50
Insulation Resistance
MΩ
5000(100VDC)
Protective Class
IP66
Cable length
m
15
Outline Dimensions :
* All dimensions in mm
Electrical Connections
Excitation + : Red
Excitation - : Black
Output+ : Green
Output- : White
Applications:
1.
Applicable in weighing and controlling the loads for trucks and vehicles in transportation, construction, agriculture & forestry and waste processor
2.
Applicable in weighing the goods, farm produce, log, garbage and excavate material
3.
Applicable in weight-check of law enforcement
4.
Applicable in checking the weight & center of gravity of airplane or battle-plane
5.
Applicable in designing and producing vehicles, and determine load distribution of wheel an axle
6.
Applicable in testing the stability of special vehicles such as fork trucks, outrigger of the mini-lift
END – M2 series Indicator cum Data processing unit.
Introduction:
Weighing indicator END-M2 adopts ∑-Δ A/D conversion technology. As a portable weighing instrument, it is applied in overloading test with two working modes: one for road management; the other for police check.
Standard Function:
»
High precision A/D conversion with readability 1/30000
»
Call and display inner code to replace weight observing and analysis tolerance
»
Able to setup zero-tracking range, zero(auto/manual) range
»
With function of dynamic compensation for speed and check tolerance
»
With nonlinearity correction function
»
Able to setup print function for auto/manual; no condition/under condition; daily/sorted statistics report printing
»
Weighing data save/check/delete/ protection in case of power off
»
Able to input vehicle ID * axis type * axis number * test staff ID.
»
Standard RS232C communication interface with selectable baud rate and communication method
»
With built-in micro printer
»
With selection of auto/manual for data lock method in dynamic working mode
»
Able to save 1000 testing records and 100 testing sites
»
With selection of road management working mode; police check working mode
»
Able to setup overloading value auto/manual
Optional Functions :
»
Customized drawer-typed fixed overloading testing system modification
»
Multi-point nonlinearity correction function modification
Technical Parameter :
»
A/D conversion method: ∑-Δ
»
A/D conversion speed: 200 times/sec
»
Max. A/D conversion bits: 24
»
Input signal range: -15mV~30mV
»
Max. net input: ≤30mV
»
Input sensitivity: ≥1 μV/e
»
Load cell excitation: DC 5V；I≤120mA
»
Max. connection number of load cell:8 at 350 ohm
»
Load cell connection mode: 4 wire
»
Verified counts: 3000
»
Max. external counts: 30000
»
Max. internal resolution: 600000
»
Division: 1/2/5/10/20/50/100 optional
»
Display: LCD display, with LED back light
»
Display range: -29990~999990 (e=10)
»
Clock: real clock without effect on power off
»
Communication interface ( RS232 C standard)
»
Serial communication interface, with selectable baud rate by continuous sending method - on command method
